GLUE & ADHESIVES
J-B Weld Professional Size Paste Adhesi
*Sub Brand: Professional Size
*Adhesion Level: High Strength
*Product Form: Paste
*Product Type: Automotive Adhesive
*Container Size: 10 oz.
*Recommended Surface Type: All Purpose
*Holding Power: 3960 psi
*Adhesive Type: Epoxy
*Curing Time: 15-24 hr.
*Color: Dark Gray
*Packaging Type: Carded
*Includes: (1) 5 oz. tube-steel and (1) 5 oz. tube-hardener
A medium-strength, blue anaerobic threadlocker that secures 1/4" to 3/4" (6-20mm) metal fasteners against vibration, leaks, and corrosion. It cures in 24 hours (10 min fixture) and allows for normal disassembly with hand tools. It is ideal for machinery, motors, and automotive applications, often requiring primer on inactive metals like stainless steel or aluminum.
Loctite 242 is a medium-strength, blue anaerobic threadlocker designed to lock and seal metal fasteners (1/4 to 3/4 inch) against vibration, leaks, and corrosion. It cures in 24 hours on metal surfaces without air, allowing for removal with hand tools. It is ideal for small motors, machinery, and automotive applications, functioning between -65 and +300 F.
Application method: Manual
Applications: Bonding plastic; Bonding rubber
Color: Clear
Cure type: Moisture cure
Fixture time, Steel: 20.0 s
Gap fill: 0.15 mm
Key characteristics: Viscosity: low viscosity; fixture: very fast fixture Operating temperature: -40.0 ?F - 180.0 ?F (-40.0 ?C - 80.0 ?C)
Physical form: Liquid
Recommended for use with: Elastomer; Plastic; Rubber
Shear strength, Mild Steel (grit blasted): 3500.0 psi (24.0 N/mm2)
Specific gravity, @ 25.0 ?C: 1.09
Viscosity: 90.0 mPa.s (cP)
To lock bushings and sleeves in housings on shafts, augment press fits, or to bond any close-fitting cylindrical parts, LOCTITE(R) 609 is a good choice. The green, high-strength, anaerobic-curing retaining compound cures in the absence of air between close fitting metal surfaces, providing a high-strength and corrosion-free bond. Typical applications include rotor to shafts in fractional and subfractional horsepower motors.
Low viscosity
Augments press fits
Fluorescent under UV for quality control
Operating temperature: -55?C to 150?C (-65?F to 300?F)
Sets in 5 to 15 minutes
Grey adhesive has excellent chemical resistance.
Fills porosities and can be used to build up worn parts.
Mixing sticks included
Red, general purpose, medium to high strength, thixotropic methacrylate-based adhesive
Steel fixture time is 15 minutes, brass 8 minutes, and stainless steel 180 minutes
It fluoresces under UV light to allow monitoring
Ideal for applications where any migration of the adhesive must be
prevented
Can tolerate slight contaminations of industrial oils
Suitable for all metal fasteners.
Temp. Range [Max] 300? F
Temp. Range [Min] -65? F
Thread Size [Max] Up to 3/4 in
Permanent Locking: Creates a very strong bond designed for fasteners that you do not plan to remove regularly. Disassembly typically requires localized heating and hand tools.
Heavy-Duty Applications: Ideal for critical components in high-vibration environments, such as studs into motor housings, ring gear bolts, and transmission shaft bolts.
Primerless and Oil Tolerant: It can be applied to "as-received" fasteners with minor surface contaminations from various oils (e.g., cutting, lubrication, anti-corrosion fluids) without needing a prior cleaning or priming step.
Versatile Metal Compatibility: Works on both active metals (like brass and copper) and passive substrates (such as stainless steel and plated surfaces).
Environmental Resistance: Once fully cured (within 24 hours), it forms a highly resistant thermoset polymer, suitable for a wide range of fluids including water, glycol, gasoline, and engine oil.
High Temperature Performance: Offers an operating temperature range of -65F to 360F (-54C to 182C).
A high-strength green, anaerobic threadlocker designed for permanent locking and sealing of studs, nuts, and bolts up to M20, particularly under heavy vibration. It works on all metals, including passive substrates (e.g., stainless steel, plated surfaces) and resists minor oil contamination.
Strength: Loctite 271 provides a high-strength, permanent bond (adding about 3,000 psi holding power on slip and press fit assemblies).
Application: It is ideal for fasteners in engines, machinery, and vehicles, such as valve covers, water pumps, and alternators. It also helps protect threads from rust and corrosion.
Curing: It is an anaerobic adhesive, meaning it cures in the absence of air between close-fitting metal surfaces. It sets in approximately 10 minutes and achieves full cure in 24 hours.
Removal: Due to its permanent nature, it is difficult to remove with hand tools alone. Disassembly typically requires localized heating of the parts to approximately 500?F (260?C) before using hand tools.
Resistance: Once cured, it is highly resistant to various fluids including gasoline, diesel, motor oil, water, and glycol. It operates in a temperature range from -65?F (-54?C) to 300?F (149?C)
High strength, low viscosity, red, methacrylate-based threadlocking adhesive which fluoresces under UV light to allow monitoring
With steel fixture time of 10 minutes, brass 5 minutes and stainless steel 15 minutes
Can tolerate slight contaminations of industrial oils
Suitable for all metal fasteners
Breakaway torque on M10 bolts of 26 Nm
Seals threads, allows through-hole tapping.
High strength, high viscosity
Suited to large threads
Prevents fasteners from loosening due to vibration
Protect against rust and corrosion
Removable with heat and hand tools.
Fix Cure Time @ Temp. 60 min @ 77? F
Full Cure Time @ Temp. 24 hr @ 72? F
Temp. Range [Max] 300? F
Temp. Range [Min] -65? F
Thread Size [Max] 7/8 in
Thread Size [Min] < 7/8 in
Torque (Break) 280 in.lb on M10 Steel
Torque (Prevail) 280 in.lb on M10 Steel
Non-Curing Paste: Loctite 5113 is a smooth, off-white, solvent-based paste that does not harden over time, which allows for easy assembly, adjustment, and disassembly using standard hand tools.
Sealing and Lubrication: It contains PTFE (polytetrafluoroethylene) for enhanced lubrication, which helps prevent corrosion or seizing of metal parts and instantly seals against moderate pressure. For maximum pressure and solvent resistance, a minimum 24-hour cure time is recommended. Versatile Compatibility: The sealant is suitable for use on metal threads and can be used on lines carrying various substances, including water pipes, alkalis (up to 10%), ethylene glycol, petroleum, and lubricating oil.
High Pressure and Temperature Tolerance: It can withstand temperatures from -65F to 300F (-51C to 149C) and seal pressures up to 5,000 PSI
Permatex's Medium-Strength Threadlocker Blue is ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Threadlocker Blue eliminates need for stocking expensive lock nuts and lock washers and locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Threadlocker BLUE is easily removable with hand tools for easy disassembly. (Mil-S-46163A, Type II, Grade N).
